欧美激情亚洲激情_夜夜嗨老熟女av一区二区三区_美女羞羞动态图_伊人视频_干老太太视频_欧美性受xxxx黒人xyx性爽_中文字幕久热_a级特黄视频_免费黄在线观看_久久er99热精品一区二区_欧美日韩亚洲二区_叔母诱惑_二区在线播放_黄色av不卡_国产日韩欧美久久

The safety operation rules of roller drawing machine are:
1.The grounding of electrical machine tools must be good, the two limiting screws of travel block must be complete.
2. When the machine tool is in the operation process, forbidden to touch the hand wheel, handle and electric button, in order to avoid accidents; prohibit the use of the hand to touch the movement parts; placement tools and other items are not allowed put on table.
3. The grinding wheel protective cover machine device, the belt cover and other safety devices must be intact, shall not be removed. All fixed screw which on the protective cover should be screwed.
4. No person shall stand in front of the wheel when driving the wheel, in order to avoid the accidents.
5. Must cut off the power tools when repairing or inspection the machine.
6. It should be smooth and slow when the wheel or drawing knife feeding, to ensure the safety. The bed surface, straightening machine guide should filled the oil often.
7. Before start the machine, grinding or drawing knife should leave the grinding roller distance, the appliance shall be in the stop state, the shaft, roller bearing and the travel block must be adjusted properly grinding roller, and fastening.
8. After drawing is completed, first it should exit the tool first, and then stop the machine. Put the roll to unload on the spacer, it should be coated with antirust oil if not used at present.